www.wysiwygwebbuilder.com

Bazza2

Hello I have two projects with different web addresses. When I publish project ONE to its local folder I see Two files for every page in the project publish file- Images and HTML. This is normal and I can upload the site to my Hosting Co no problem. I have published project two in the past without a ...

Bazza2

Hello
My log in stopped working.
Than I was advised I had exceeded the number of attempts to log in.
Then I was advised Capcha was going to be used on my log in.
Then it appears I have connected.
So if this goes through please confirm all is OK with my account.
Thanks
Barry

Bazza2

Hello
I have set up an email using the Insert Link/Email address.
It will not work in preview F5. Just wondering if the site needs to be published for it to work.

Many Thanks

Bazza2

Hello Pablo Many thanks. I placed the anchor next to the text low on the page. Set the link in the text top of page and when tested the anchor and text did not rise to the top of the viewing area. It tended to rise to the lower part of the viewing area. I notice in help that anchors will not work ...

Bazza2

Thanks Pablo I have a friend who had his site done by another person and they have falling out. My friend is now going to do his own site. I had him download the latest trial of WYSIWYG and I will help him to get to know it. It should turn into a new paid customer. I have not used Templates before ...

Bazza2

Hello Not sure what this is called but I thought it would be Anchor text but I cant find that in search. I am making a one page website so the links (that will be text)will be in the header and when one of the text "Links" is selected it will navigate to a text word position lower on the same page ...

Bazza2

Here is the full detail I place place layer on the page and size it. I have saved an image with just one word save so it can be a file name problem and drag that into the layer The only change I make is to tick Relative Horizontal Sizing and when I do that and f5 the layer moved from where it should ...

Bazza2

I have been using Layers without a problem. It has been awhile though so I may be forgetting something. I place a layer on the page and drag a image into the Layer. No problem F5 to view the site and it is fine. If I select Relative Horizontal Sizing when I F5 to view the Layer has moved up the page ...

Bazza2

I suspect this topic is for Pablo Thank for the wonderful Soft wear Pablo. Computer A This computer is running Version 16 and this is the computer I use to build my websites with. Computer B I purchased in 2019 and do not build websites with this computer but I find it handy to help with the editing ...

Bazza2

Hello I use the CSS Menu to link my internal web pages and link to an external web address without a problem. When I try to use the CSS Menu option to link to an Email (and that option is available) I select the email option and type in the email address and then save. But the email option changes ...

Bazza2

All good. I fixed it

Bazza2

Ah, I see the problem Without anything being selected in the workspace the menu in the top Ribbon being-- File, Insert, Page, View, Arrange, Tools, Help, have no commands underneath them As soon as I select something in the workspace the commands show under the Menu such as Crop Etc Obviously I have ...

Bazza2

hello
I place an image on the page.
The crop tool is showing in the top toolbar ribbon.

Once I select Crop the image receives the rectangle to crop the image but the Crop disappears from the top toolbar so it is impossible to do the crop.

Any suggestions

Bazza2

Wow, thanks for all the replies. I think I will stick with 3 break points and leave the break point sizes as is. Saves having to change all the break point in the pages that are already existing. I had a look at Lay out grids originally but my site is rather complex and I get the feeling that the ...

Bazza2

Hello Crispy68
Thanks for your feed back. Appreciated

Barry

Bazza2

I am just refreshing my site after many years of good service. I had the small break point at 320 but my thinking is that I phones have larger screens today and most professionals carry larger phones. It would certainly help my web build to be working within a larger size page in the small break ...

Bazza2

My existing site had a 320 Break point showing on all pages in my build. I have decided to delete the 320 break point and replace it with a 420. So I deleted the 321 beak point from the index page and replaced it with a 420 and it worked fine on that page. I notice the 320 break point is still on ...

Bazza2

Thanks Pablo
Perfect

Barry

Bazza2

The Ribbon Interface going across top of page does not stay visible all the time. It used to but perhaps I inadvertently turned it off to stay in place. It will only pop up now when an application is required. Where is the lock in place button for the Ribbon Interface as it is not obvious to me ...

Bazza2

Thanks Colin Nice to hear from you. Love the design of your site. I was thinking along the lines of something like that modern look but I decided something more old school as I do have a site intensive with links so a more link friendly site was my goal. I checked out how the newspaper sites handle ...

Bazza2

Hello My site is now roughed in...I still need to get a cleaner cap top of page and fix some of the text up Would appreciate any ideas how to improve look of the three Square layers with text inside. They are just under the Page links. To me they just let down the look of it. I have considered just ...

Bazza2

Thanks Alan
Got it.

Bazza2

Thanks Pablo I see what you mean. Certainly would make it easier to see my problem. I can save my project to a new name and then delete all the pages and just work with the Master frame and one page to indicate my problem. I do not understand how I can present that to you as I would not want to take ...

Bazza2

And finally I think I worked it out LOL

Glad most of you Guys and Girls are asleep-saves me the embarrassment.

You can only put a layer checked for Horizontal sizing in a header or footer of some description (In my case the master frame)

Let me know if I am right.

Bazza2

More Help See URL http://www.baseballcap.net.au/ Using page links called Home page or standard range (They are the same link) It can be seen the brown layer is top of page over the pictorial detail from the master frame. I have an insert there of the work page before uploading. It can be seen the ...

Bazza2

Hello I am using a Master frame with my project and it works fine with all the work space pages in the site manager viewing correctly When I place a LAYER full width hard up against the top of one of the work space pages in the site manager and F5 it works perfect and the detail from the master ...

Bazza2

Thanks for the reply The break point page I was messing around with and just left it messy. The main problem was the text was changing size when I worked it. I tried something. In the break point page I took the text out of the layer. Hid the layer and then put the text back into the same spot and ...

Bazza2

Hello. See my website below The 3 boxes I used a layer with a border The text inside the layer is with line spacing 1.1 Works fine on the main page but when I go to break point pages it all becomes unstable I tried just text with a border but that is impossible to size the border as it needs to be ...

Bazza2

Try This Open my website then drag the page to size for a mobile phone I want to hide the Mauve triangle but the hiding tool in the left toolbox is missing since I upgraded to WB16. I would rather like to know what I am doing to find it rather than clicking on things and making things worse http ...

Bazza2

Hello In upgrading to WB16 from WB12 the setting I had in the left toolbox where I could hide images usually when using small screen size like 320px Etc has dissapeared I have looked at help without success. I have a screen shot to attach if required. Where do I attach the Jpg of the image. Thanks ...

Bazza2

Hello All I have managed to minimise the top toolbar on this new version WB16. I can only see the text now File-Home-Insert-View-Arrange-Tools Etc When I select one of the options it opens up over the top of the work space and may cover what I want to work on. I have tried to find help on this with ...

Bazza2

Hello Pablo Sorry I missed this post and in the meantime I have purchased 32bit I am happy though and apart from having to replace some bold text that did not take to nicely to the upgrade from 12 to 16 it transitioned fine. I do not have big files so I am happy. Perhaps I can look at it when I ...

Bazza2

Hello Pablo Obviously I have been happy with WB12 as I am still using it but I think it is time to upgrade to WB16. I have two questions, if you wish to give more information I will not complain. Upon upgrading will my WB12 files convert into WB16 files without an issue. I read in your posts that if ...

Bazza2

I got it to work OK with single picture. Expands perfectly
Many Thanks

Bazza2

Thanks Bacon Fries. You are always here to step up-appreciated I just found this help link a bit short on substance http://www.wysiwygwebbuilder.com/lightboxes.html I tried what you suggested I dragged the Photo Gallery onto the page Set it to Light Box/fancybox. Added a small picture first and then ...

Bazza2

Sorry missed picture does not enlarge.
I always thought the main use of a Lightbox was to have a small picture on the page and when selected it enlarges for better viewing

Bazza2

I am using the one available in the webbuilder version 12
Drag Slide show
Insert picture
Go to object properties and select Lightbox Gallery/Fancy Box
View by using F5

Bazza2

I am using slide show. One image.
I am choosing Light box option and it works but the image does not enlarge when previewed.
I tried different size images but whatever size image I choose the light box opens much the same size.
What am I missing
Thanks in advance

Bazza2

I think I fixed it
Let you know if I do not
Keep safe all.

Barry

Bazza2

Hello I wish to have a Photo of one baseball cap and underneath the cap photo I wish to have a pop up light box that will expand when selected to show all the colours that are available in that cap. I intend to repeat this many times on each model cap. So I selected Photo Gallery and added the ...

Bazza2

Thanks Pablo Many Thanks How did I miss that. On a similar theme. The layer has on option to make it transparent but it appears to not have any colours associated with it. I would have thought you could choose solid colour them apply a percentage of transparency. Can the layer be made a colour with ...

Bazza2

When I select the page background gradient it only offers one colour. Surely it should offer two colours. What anm I missing.
If I select Multicolour gradient I am unable to find a way to have grey at the top going to black at the bottom.
Any suggestions how to achieve this appreciated.

Bazza2

Hello Pablo I have added a second computer (Laptop) My original invoice for WB11 advised it may be installed on 3 computers. I updated to Version 12 on 6th January 2018. Can I install V12 on this new Laptop and if so how do I do it. I still have the product key ending in 2Y15 Many thanks Barry Moore ...

Bazza2

Hello My URL is baseballcap.net.au and my search terms are based around Baseball caps. It is being found but in low competition locations. I used to rank well but everything has vanished. Well all but. Nothing concrete but perhaps I am being penalised with an exact match domain. I am thing about ...

Bazza2

This is off web building subject a little but I hope someone can help as I am unable to find the answer in Google search I want to compose an email in outlook that will have a URL address on the page. I do not want that URL to be live so the receiver needs to copy it and paste it into the browser ...

Bazza2

Thanks. Tried it on my I phone. I see what you mean. Actually the black layer is being dragged all the way over where the rest of the site is maintaining its correct position the way it is built in the 768 breakpoint. So the problem is in the layer It should remain in sync with the rest of the page ...

Bazza2

Thanks for the input. Yes it did take some time to align things. But coming up another WYSIWYG this WB11 is fantastic to me and it felt quick to do. I will read up on grids. Alex, not sure what you mean. My breakpoint is set at 768px so I would not expect it to adapt to a smart phone. Being new to ...

Bazza2

Default page and break point for 768PX

Any comments or technical stuff appreciated.

http://dev.baseballcap.net.au/

Bazza

Bazza2

Well done Roger.
Looking Good
Still love those dogs.
I am half way with my rebuild but not sure if I have the bravery to replace my current site on the same URL. Afraid of losing Ranking.
I might just keep it in reserve until Web Studio is no more.

Bazza

Search found 49 matches