MULTI RESPONSIVE MENU

Patrik iden · Post by **Patrik iden** » Thu Jun 11, 2015 11:28 am

tdr wrote:Is there a way I could have an inline logo with the menu on the left? e.g. as per this example http://www.govx.com/
thanks!

No. i'm sorry.

andyp · Post by **andyp** » Sun Jun 21, 2015 9:25 pm

Hi Patrik

I am not working on a new site and looking to use this.

Oddly... when testing this out on a a few separate pages disabling "Use java script" doesnt allow for the menu to be centralised.. in some cases.. but not all?

I have had to play around with enabling/disabling "Use java script" to get a slide show going... but unfortunately all this testing isnt consistant.....

Also using this menu changes the position of an image placed on the left.. it moves the image over about a third of the page?

And can the menu in a specific position....other the default top position?

Thanks

AndyP

Patrik iden · Post by **Patrik iden** » Sun Jun 21, 2015 10:34 pm

andyp wrote:Hi Patrik

I am not working on a new site and looking to use this.

However using this seems to change the position of an image placed on the left.. it moves the image over about a third of the page?

And how to keep the menu in a specific place such for for each break point other than the default top position?

Thanks

AndyP

I dont know about the image problem, (do you have an url?), but as for the position you can: Set the fixed position to No. And then use the setting "Menu position from top"

andyp · Post by **andyp** » Sun Jun 21, 2015 10:41 pm

Hi.. I was editing my post because I kept getting different testing results as I was going along.. so the quote is slightly different to what you answered to...

This is the edited query:

Oddly... when testing this out on a a few separate pages disabling "Use java script" doesnt allow for the menu to be centralised.. in some cases.. but not all?

I have had to play around with enabling/disabling "Use java script" to get a slide show going... but unfortunately all this testing isnt consistent.....

Also using this menu changes the position of an image placed on the left.. it moves the image over about a third of the page?

I am going to upload a test project very soon....

andyp · Post by **andyp** » Sun Jun 21, 2015 11:09 pm

The test project can be found at:

http://www.apgraphx.co.uk/downloads/MRM-test.zip

The information is on the index page.. so go to preview all pages and it will take you through what is happening...

Thanks
Andyp

Patrik iden · Post by **Patrik iden** » Mon Jun 22, 2015 12:26 am

andyp wrote:The test project can be found at:

http://www.apgraphx.co.uk/downloads/MRM-test.zip

The information is on the index page.. so go to preview all pages and it will take you through what is happening...

Thanks
Andyp

There is now project file in this zip.

Patrik iden · Post by **Patrik iden** » Mon Jun 22, 2015 12:35 am

I found what the image/content problem is. I have made an update and added an option in the menu settings "Page Width" just set this value to the width of your page. But i can also see a problem using this menu with breakpoints but you can test it now if you want to, here is the download link for the update: https://mega.co.nz/#!tw0A3TIA!7DLSJVpBp ... 9_ZWkxz9y4

andyp · Post by **andyp** » Mon Jun 22, 2015 12:56 am

Thanks Patrik... .. set the "page width" to the default size of 1360 but no joy

Thanks
Andyp

Patrik iden · Post by **Patrik iden** » Mon Jun 22, 2015 1:44 am

andyp wrote:Thanks Patrik... .. set the "page width" to the default size of 1360 but no joy

Thanks
Andyp

Strange this worked for me. Please send me the project file.

andyp · Post by **andyp** » Mon Jun 22, 2015 10:12 am

For whatever reason I got it going today... all I did was to uninstall and reinstall.. whether that had anything to do with it I dont know

However.. you are correct that this cant be used in break points

Thanks

AndyP

Patrik iden · Post by **Patrik iden** » Mon Jun 22, 2015 11:47 am

OK, try this one: https://mega.co.nz/#!MtkHjKLR!SQsdBkGQG ... gjmMLELXUg
Make sure to uninstall and reinstall.

andyp · Post by **andyp** » Mon Jun 22, 2015 12:30 pm

Thanks Patrik...

On a quick test this looks like it is fully responsive... so well done..

Would this then make the setting for the page width invalid?

Is there a way to be able to position it other than the default position at the top.. again for break points?

Thanks

AndyP

Patrik iden · Post by **Patrik iden** » Mon Jun 22, 2015 12:43 pm

andyp wrote:Thanks Patrik...

On a quick test this looks like it is fully responsive... so well done..

Would this then make the setting for the page width invalid?

Is there a way to be able to position it other than the default position at the top.. again for break points?

Thanks

AndyP

I have removed the page width setting from this update: https://mega.co.nz/#!JtNBGZ5D!etlrO9Z3Q ... b0j88oCRhg
To move it down from the top set the "fixed position" option to "No", and then you can use the "Menu position from top" option to move the menu down.

andyp · Post by **andyp** » Mon Jun 22, 2015 1:46 pm

Ok all seems to work great now thanks.. looks like it is fully responsive to all sizes.. so well done!

The only thing is being able to freely position it to suit each specific break point other than the top because the setting would be fixed throughout the project where I am using a master page.

However... it looks like I will keep it at the top.

Thanks again Patrik

Regards

Andrew Peters

Patrik iden · Post by **Patrik iden** » Mon Jun 22, 2015 7:16 pm

Hey, you can use this css if you want the menu to have different top positioning for differnt brakepoints:

Code: Select all

<style>
@media screen and (min-width: 971px) {
.ribbon{
position: absolute;
margin-top: 20px;
    }
}

@media screen and (min-width: 581px) and (max-width: 970px) {
.ribbon{
position: absolute;
margin-top: 40px;
    }
}

@media screen and (min-width: 320px) and (max-width: 580px) {
.ribbon{
position: absolute;
margin-top: 60px;
    }
}
</style>

Ohh and yes, dont forget to make the menu not wider than the smallest BP. If your smallest BP is 320px set the menu width to 320 as well (In the workspace that is).

andyp · Post by **andyp** » Mon Jun 22, 2015 9:47 pm

Ok thanks

mustafa.gramocelji · Post by **mustafa.gramocelji** » Wed Jun 24, 2015 4:53 pm

One question I use MRM v.1.1.0.0 updated in Jun and when I make preview in IE all is normal but in FF and chrome I got menu buttons RED . What is problem here

?

Patrik iden · Post by **Patrik iden** » Wed Jun 24, 2015 5:20 pm

mustafa.gramocelji wrote:One question I use MRM v.1.1.0.0 updated in Jun and when I make preview in IE all is normal but in FF and chrome I got menu buttons RED . What is problem here ?

Do you have an url or a project file?

mustafa.gramocelji · Post by **mustafa.gramocelji** » Wed Jun 24, 2015 5:23 pm

Patrik iden wrote:
mustafa.gramocelji wrote:One question I use MRM v.1.1.0.0 updated in Jun and when I make preview in IE all is normal but in FF and chrome I got menu buttons RED . What is problem here ?
Do you have an url or a project file?

give me minute will be upload

www.mujanovici.com.ba/screen/RED%20MENU.ZIP

Patrik iden · Post by **Patrik iden** » Wed Jun 24, 2015 5:49 pm

mustafa.gramocelji wrote:
Patrik iden wrote:
mustafa.gramocelji wrote:One question I use MRM v.1.1.0.0 updated in Jun and when I make preview in IE all is normal but in FF and chrome I got menu buttons RED . What is problem here ?
Do you have an url or a project file?

give me minute will be upload

http://www.mujanovici.com.ba/screen/RED%20MENU.ZIP

Hey, ware did this update come from, the last update is 2015-05-05 and the version is: v1.0.0.1. Please always download from the bottom of the first post.
Please try and download again.

mustafa.gramocelji · Post by **mustafa.gramocelji** » Wed Jun 24, 2015 5:52 pm

I can upload you that extension so you can see I think that you was made some change for andyp

Patrik iden · Post by **Patrik iden** » Wed Jun 24, 2015 5:54 pm

mustafa.gramocelji wrote:I can upload you that extension so you can see I think that you was made some change for andyp

Yes but the version is still: v1.0.0.1

Patrik iden · Post by **Patrik iden** » Wed Jun 24, 2015 6:23 pm

This comment is moved to bottom.

mustafa.gramocelji · Post by **mustafa.gramocelji** » Wed Jun 24, 2015 6:27 pm

Patrik iden wrote:
mustafa.gramocelji wrote:I can upload you that extension so you can see I think that you was made some change for andyp
Yes but the version is still: v1.0.0.1

Patrik iden · Post by **Patrik iden** » Wed Jun 24, 2015 6:29 pm

Yes i can see this, but this is wrong, look at the Extension it self after you have draged it on to your workspace it says v1.0.0.1. But never mind. The problems you are having is that you do not have any links. You must point you'r links to actual/real links, eg, HOME = index.html. So the red color you are having is the Active link color. If you want to test the menu without links you can: 1. Set the Use Active links setting to "No". 2. Set the color for the Active links to the same color as the Bigscreen menu colors.

mustafa.gramocelji · Post by **mustafa.gramocelji** » Wed Jun 24, 2015 6:31 pm

Patrik iden wrote:Yes i can see this, but this is wrong, look at the Extension it self after you have draged it on to your workspace it says v1.0.0.1. But never mind. The problems you are having is that you do not have any links. You must point you'r links to actual/real links, eg, HOME = index.html. So the red color you are having is the Active link color. If you want to test the menu without links you can: 1. Set the Use Active links setting to "No". 2. Set the color for the Active links to the same color as the Bigscreen menu colors.

Yes I get that now
my apologize if I was annoying you and again one more time BIG THANKS mate

one of best

Patrik iden · Post by **Patrik iden** » Wed Jun 24, 2015 6:36 pm

mustafa.gramocelji wrote:
Patrik iden wrote:Yes i can see this, but this is wrong, look at the Extension it self after you have draged it on to your workspace it says v1.0.0.1. But never mind. The problems you are having is that you do not have any links. You must point you'r links to actual/real links, eg, HOME = index.html. So the red color you are having is the Active link color. If you want to test the menu without links you can: 1. Set the Use Active links setting to "No". 2. Set the color for the Active links to the same color as the Bigscreen menu colors.
Yes I get that now
my apologize if I was annoying you and again one more time BIG THANKS mate
one of best

Thank's. Hope it works out ok

Patrik iden · Post by **Patrik iden** » Sun Jul 12, 2015 12:59 pm

Well i gues you can do like this: Add an HTML box and put this code in it (between <head></head> tag:

Code: Select all

.rmm-toggled-title{
background-image: url("http://your_domain.com/your_images_folder/your_image.png");
background-repeat: no-repeat;
height: 48px; /* or what ever size you want */
width: 48px; /* or what ever size you want */
margin-left: 25px; /* or where ever you want to place the image from the left */

In extension settings for the Navigation text set the Navigation text top setting to 0 (zero) or where ever you want to place the image from the top.

Then remove the Navigation text from Extension settings

But this only works for the mobile view menu. And i cant get any link to function.

Patrik iden · Post by **Patrik iden** » Fri Jul 17, 2015 2:32 pm

wennbley wrote:Hi Patrik, is this project still live? The link is not working now.

Try now: https://mega.nz/#!sgFnWZhK!jBz_Lh7PdueO ... ukHoAY0I-I

burglar · Post by **burglar** » Fri Jul 31, 2015 10:56 pm

The menu does not work in Master Frame?

It is visible when i preview my master frame page, but not when i preview my site pages??

Patrik iden · Post by **Patrik iden** » Sat Aug 01, 2015 7:40 am

burglar wrote:The menu does not work in Master Frame?

It is visible when i preview my master frame page, but not when i preview my site pages??

Use master objects.

fr02774 · Post by **fr02774** » Sun Aug 02, 2015 10:43 am

hello,
i want to update my site in reponsive mode, and i test your menu.

I think it's have all i want, but i have 3 problems :
- i use 'synchronise with site' for the menu. I use folder and sub-folder for my site. Is-it possible with the menu to forbid to click in the menu on folder name (in page test, i don't want to click on menu 'le foot' for exemple)
- i want the menu stay visible.I set this and that works. But, my menu is not at position 0,0 but at 0,99. How can i do for it begin at 0,99, and when i scroll, it up to 0,0
- and i have a strange problem. You can see it with menu "le foot". when i choose "le foot" i have lot of submenu. When i select a submenu, it is display on a strange way, mix with the old menu. Can i display submenu, righter is folder ? Like my older menu here http://marius-david.fr/presentation.php

you can find the test page here http://marius-david.fr/presentation2.php

subsidiary question : do you have a documentation for all your option ? I did'nt found it.

Than a lot for your help.

Patrik iden · Post by **Patrik iden** » Sun Aug 02, 2015 2:16 pm

Hello,
(in page test, i don't want to click on menu 'le foot' for exemple). Answer: do not use any link on the le foot main menu button.
How can i do for it begin at 0,99, and when i scroll, it up to 0,0. Answer: You can't.
you can have submenus on other submenus.
I have no documentation. Just read the info on every option.

Have you tried the WWB CSS Menu?

fr02774 · Post by **fr02774** » Sun Aug 02, 2015 4:37 pm

Patrik iden wrote:Hello,
(in page test, i don't want to click on menu 'le foot' for exemple). Answer: do not use any link on the le foot main menu button.
How can i do for it begin at 0,99, and when i scroll, it up to 0,0. Answer: You can't.
you can have submenus on other submenus.
I have no documentation. Just read the info on every option.

Have you tried the WWB CSS Menu?

thank for your reply.I did not think have an answer a Sunday!
I'll look in the comments options

Do you know how to remove the link on main button ? It's automaticlly created by the extension, when i have checked 'syncrhonised with site manager.

regards

Patrik iden · Post by **Patrik iden** » Sun Aug 02, 2015 6:10 pm

Do you know how to remove the link on main button ? Answer: You will have to add the links manualy.

burglar · Post by **burglar** » Mon Aug 03, 2015 8:58 pm

My site contains a fixed header and footer. Master objects does not allow for this. Is there any other way round it?

Patrik iden · Post by **Patrik iden** » Mon Aug 03, 2015 9:10 pm

burglar wrote:My site contains a fixed header and footer. Master objects does not allow for this. Is there any other way round it?

Not that i know about.

fr02774 · Post by **fr02774** » Mon Aug 03, 2015 10:35 pm

Patrik iden wrote:Hello,
(in page test, i don't want to click on menu 'le foot' for exemple). Answer: do not use any link on the le foot main menu button.
How can i do for it begin at 0,99, and when i scroll, it up to 0,0. Answer: You can't.
you can have submenus on other submenus.
I have no documentation. Just read the info on every option.

Have you tried the WWB CSS Menu?

hello,

all has been corrected, but it stay the problem with submenu
- when i choose "le foot" i have lot of submenu. When i select a submenu, it is display on a strange way, mix with the old menu. Can i display submenu, righter is folder ?
How can I shif (padding) the levels of submenu ? what is the option ?

i search to have this
menu
submenu level 1
submenu level 1 - submenu level 2 - submenu level 3
submenu level 2

the problem is here --> http://marius-david.fr/presentation2.php menu "le foot" and submenu a year

thanks

Patrik iden · Post by **Patrik iden** » Mon Aug 03, 2015 10:43 pm

You can't have submenus on other submenus. This is only a 2-level menu.

Vlastimil · Post by **Vlastimil** » Sun Mar 13, 2016 5:58 pm

Hi, when I use in Back Button Text some Czech characters (project is based on in UTF-8), the czech characters are not displayed correctly.

Patrik iden · Post by **Patrik iden** » Sun Mar 13, 2016 6:34 pm

Vlastimil wrote:Hi, when I use in Back Button Text some Czech characters (project is based on in UTF-8), the czech characters are not displayed correctly.

Sorry i dont know wy this is.

Vlastimil · Post by **Vlastimil** » Fri Mar 18, 2016 3:03 pm

Thanks for your answer.

cdasupport · Post by **cdasupport** » Wed Sep 13, 2017 11:32 am

Hi gys'n gals

May I be so bold to ask, all the files that are in the download, how am I suppose to install this and where do all the files and folders goto ?

Jase

Patrik iden · Post by **Patrik iden** » Wed Sep 13, 2017 6:20 pm

You only use the Extension file.

smile · Post by **smile** » Sat Dec 11, 2021 11:57 pm

Why is the menu jumping to the left side of the screen when navigating? This is on chrome browser and firefox waterfox. ?
Please fix it.

See video https://easyupload.io/74whzn

BaconFries · Post by **BaconFries** » Sun Dec 12, 2021 10:45 pm

You may or may not get a reply soon as the developer of the extension has not been active since Feb 21. Note if you are trying to use with other menus then there may be conflicts with different versions of jQuery.