jor_aniMateMASTERPACKv3.0 b5.62___**UPDATE**___b5.63

[jordan]

Wooow, so much good stuff. Thanks for your hard work.

TNX Ainu, enjoy! . .

[stamjoe]

Jordan
I HAVE NO WORDS FOR IT!!!!!!!!!!!
Speeachless!!!!!!!!!!
Congrats man!!!!!!!!!
Joe

[jordan]

Hello stamjoe,

Thank you, much appreciated! . .

[jordan]

jor_aniMateMASTERPACKv3.0 build 5.2 update

WHOOOAAA!, build 5.2 finally done, finally JMPv3.0 as I want it to be, pffff ...!:)
JMPv3.0 build 5.2 offers a big change and improvement, some enhancements, fixes, new options ...
BUT above all - JMPv3.0 build 5.2 is about OPTIMIZING!

JMPv3.0 build 5.2 summary:
- some enhancements, fixes and new options
- OPTIMIZE JMPv3.0 by disabling many individual modules! - (jor_aniMateLIMITER - see online manual!)
- 2 new JMP tutorials (roundabout + cycle)
- all JMP tutorials now have an online JMPv3.0 version check
- new full module | cycle playground

================================================================
IMPORTANT: before updating!
see the JMPv3.0 online manual for info on the OPTIMIZE change! - visit jorextensions.com - section JMPv3.0 manual !
================================================================

for full update history, demos, tutorials and download see top post

[jordan]

jor_aniMateMASTERPACKv3.0 build 5.3 update

JMPv3.0 build 5.3 is another BIG!:) update, way too much to note all here ...

JMPv3.0 build 5.3 summary:
- module | reposition - aspect ratio to image
- module | cycle - aspect ratio to slideshow
- module | parallax almost a complete rewrite of module | parallax
- easy tools | developer - real time developer tool
- window alert warning for all modules that require jor_aniMateLIMITER (excl:2DTrans)
- new online tutorial - A basic parallax composition
- much much more ...

see also the new jor_INSPIREREYS section on jorextensions.com for new cool template demo!

for full update history, demos, tutorials and download see top post

[haakoo]

Maar weer even stoeien,Jordan

**translate:Having a go at it**

Hans

[jordan]

Maar weer even stoeien,Jordan

**translate:Having a go at it**

Hans

hehe haakoo,

happy wrestling - just shout out if you get into a lock hold . .

[digrom]

Hello I have a problem, I use wb9 WB10 and with both the extension does not work even with the templates downloaded from your wesite

[jordan]

hello digrom

what does not work ? - can you open JMPv3.0, is it installed ?

[digrom]

yes, I downloaded the extension and the demo too, but until the demo does not hurt them objects works stopped

sorry my English

[jordan]

sorry I don't understand you digrom, I need to know - what is not working
please answer this question first - can you open JMPv3.0 inside WB or not ?

[digrom]

hello really do not know WHAT is happening already downloaded all I will leave here a picture and the demo

image: http://digrom.com.br/test/foto.png

demo: http://digrom.com.br/test/demo.html

if you have some missing please tell me where to download file

[jordan]

hello digrom,

thank you much for the information
you have set a Target Folder For File Types (js/js) folder in WB, this prevents two JMPv3.0 files from being accessed
remove the Target Folder For File Types (js/js) from WB

[digrom]

thank you solved my problem

[jordan]

jor_aniMateMASTERPACKv3.0 build 5.4 - HOLYCOW UPDATE!

JMPv3.0 build 5.4 is a smaller in numbers but a huge in enhancement - HOLYCOW UPDATE! . .

JMPv3.0 build 5.4 summary:
- module | onscroll - complete new onscroll mode - 01. ANIMATOR and the NEW 02. ENTER mode
- new easy tools | global disable onscroll option for touch device - (touch/simulate)
- jor_aniMateLIMITER - new option integrated animate.css CSS3 animation library
- jor_aniMateLIMITER - all modules are now disabled by default (see WARNING online manual)
- 2 new online tutorials (draggable handle/basic onscroll enter)
- redesign/cleanup online manual
- other ...

Head over to jorextensions.com and see the new - onscroll online tutorial - download the demo - !HOLYCOW! - you don't want to miss this!
AND OH YEAH - (LAST TIME:) - HOLYCOW - it's - still - FREE!

for full update history, demos, tutorials and download see top post

[jordan]

hello sharpola,

TNX, glad you like it, appreciate the words!

There is already a step by step online tutorial (and demo download) available, see here - JMPv3.0 Online Tutorials
a lot of information can also be found here - JMPv3.0 Online Manual
a click on the link (left-low) in the JMPv3.0 extension will also bring you straight to the JMPv3.0 Online Manual

and after that if your still stuck then just post your question here, just shout out

[jordan]

jor_aniMateMASTERPACKv3.0 build 5.5

JMPv3.0 build 5.5 is a great responsive enhancement update

JMPv3.0 build 5.5 summary:
- responsive enhanced - module | reposition - visibility default state is now false
- responsive enhanced - module | onscroll - visibility default state is now false
- responsive enhanced - module | onscroll - new option - mark default breakpoint
- easy tools | preblock - new option - callback after preblock
- other ...

see also a NEW cool demo with the new responsive enhancements in the jor_INSPIREREYS section on jorextensions.com

for full update history, demos, tutorials and download see top post

[sikhoonak2]

i wanna use 12 object show by this extention but i need to use delay between apear objects
i many search in jor_animatetemplate and cant found any option to set delay in mudole | onscroll

[jordan]

i wanna use 12 object show by this extention but i need to use delay between apear objects
i many search in jor_animatetemplate and cant found any option to set delay in mudole | onscroll

hi sikhoonak2,

delay is created with the property - enter | offset
it's a position offset in percentage as to when the effect activates in the window viewport

==========
Q:
your other quest/different post - 12 objects, 12 instances ?
A:
if you want to have different effects for each object then yes (simplest) you set up an instance for each object
however, if they all share the same effect then you can use a class instead
add a class to the WB Text Object (=Inside Tag - ie. class='myScrollFX')
then target the class .myScrollFX with the selector property (don't forget the - point in front - it's a class)

hope this helps!

[FX3D]

I love your online manual Jordan it is very nice to read and easy to follow, I would love it to have an iframe, layer or pop-up window showcasing the actual section (effect) you are reading about, without having to navigate away from the page.

Maybe just a simple shape or some text so you can visualise the effect you are reading about


All in all a great extension with an almost wiki-like information page


Many Thanks Jordan

[jordan]

hehe FX3D tops to hear you like (+feedback)!:)
maybe I will add some more images or video in the future to make it more visual
but I have so much on my to-do list, more tutorials for one, which is the best visual aid I think:)

[jordan]

hello sharpola,

I have no idea how your using JMPv3.0 or what your trying to do from your question ?
specifics please …

[jordan]

jor_aniMateMASTERPACKv3.0 build 5.6 - CRAZY CHICKEN UPDATE!

JMPv3.0 build 5.6 summary:

JMPv3.0 build 5.6 is the biggest update of JMPv3.0 this far
the main purpose of this update is to make JMPv3.0 compatible with RWD and modern web design
for this reason several modules have been removed as being less suitable for RWD/modern web design
the following modules were removed:
- module | nivo
- module | roundabout
- module | swf

many many new changes, enhancement, fixes, options and powerful possibilities were added

for full update history, demos, tutorials and download see - visit jorextensions.com

see also a new cool demo that showcases many of the new features in the jor_INSPIREREYS section on jorextensions.com - (around the globe)

NOTE: JMPv3.0 b5.6 is WB10+ only!

[BaconFries]

As always great work jordan...

[jordan]

TNX much Calum:) - has been a loOot of work - but finally YEAH done . .

[jordan]

JMPv3.0 UPDATE 5.6 REMOVED!

I run into a design fault in JMPv3.0 b5.6 therefore b5.6 has been removed
this fault also involves jor_carouselManipulation 10.0 which is not yet released . pfef:)
both will be released later!

[sikhoonak2]

i love u jordan , you are best...

[jordan]

jor_aniMateMASTERPACKv3.0 build 5.61 - CRAZY CHICKEN UPDATE!

- IMPORTANT: corrected several related b5.6 design faults

for full update history, demos, tutorials and download see top post



@ sikhoonak2 - TNX . .

[jordan]

jor_aniMateMASTERPACKv3.0 build 5.62 - UPDATE!

this update fixes, optimizes code and adds some new options

for full update history, demos, tutorials and download see top post

[BaconFries]

Nice update Jordan.

[jordan]

I'm trying to use the Reposition Mode. I've run into a snag or two. I'm thrilled at what this mode can do. I've used the onscroll mode as well with the http://www.mysmallbusinessally.com opening as well.

(1)
I'm using a master frame page along with the Reposition Mode. I've tried it with the master frame page in the same folder or in a different folder and it doesn't seem to affect the outcome.

If I put the page with the reposition mode in a folder, the reposition doesn't work.

If I don't put the page in the folder, it works perfectly (usually).

Is that just a quirk about the reposition mode or ANIMATE extension?

Here are two links to demonstrate the differences between a page outside the Members folder that is under the LOGIN folder and one that is inside the Members folder.

http://mysmallbusinessally.com/LOGIN/login.php

http://mysmallbusinessally.com/LOGIN/Members/login.php

The two pages are identical. I cloned one to make the other one.

A little background... I'm designing a login/database for users of a website. I started a new WWB website to design and test it out. The LOGIN in folder contains my work in progress. I have a different website file that will be the main file for the entire website. I just wanted to get this worked out first and then incorporate it into the main file.

(2)
I've also found that the reposition mode will not modify a ContentPlaceHolder if the ContentPlaceHolder has a transparent background AND NO border. It can't be totally transparent. I'm currently using a dotted border of 1 pix which works. Is this just the way it works?

hi ALguy61,

great you like and experiment!:)

there is too much on the page(s) for me to understand your setup, what your trying to do, and what's wrong ?
as far as what I can see and understand ...

SELECTOR ?
the contentplaceholder on your page is named - MFContentPlaceHolder1
in module reposition the selector is named - ContentPlaceHolder1
- incorrect selector entry !

PROPERTY FULL WIDTH ?
on the contentplaceholder you have entered the property full width as --- pixel-width + window-width
you need to use the command --- 0+win1 - (0 = pixel calculate / +win1 = window/object calculate)
- incorrect property entry !
see my online manual - module | reposition > property construct other mode

ONSCROLL USE ?
your using two JMPv3.0 instances on the same page with (it seems) the same code on the same object(s) ?
- this can produce unexpected behavior !

====== =
RECOMMENDED:
module reposition is a - scripted - solution to do things that are not possible in WB
use module reposition in scenarios that can - not - be achieved with WB !
====== =

hope this helps, else just shout out!:)

[ALguy61]

Thanks for your quick response. Thanks again for pointing out the naming error. The second link now works as expected. I had tested the links before posting the original topic and they both worked as expected. When I clicked on them today, the second one didn't work like it should until I corrected the name of the ContentPlaceHolder. Thanks again!


I'm not sure why I changed the full width on the ContentPlaceHolder. The expression that was there came from reading your tutorial. After working with the module a while, it occurred to me that it should be an expression like "150 + window1" and not the literal expression 'pixel-width + window-width' that I had. I had put that "pixel-width + window-width" on other objects and saw no change. When I realized what should be there, I put "0 + window1" and everything worked perfectly.

To illustrate the problem with a totally transparent ContentPlaceHolder, I created a clone of the login page that works correctly and a clone of the MasterFrame page. In the clone of the MasterFrame page, I made sure the style of ContentPlaceHolder1 had the background as transparent and the width of the border as 0. If you go to the links below you will see that the MasterFrame that is totally transparent, doesn't work. I had to give a border to the ContentPlaceHolder1 for it to work. If you look closely at the page that works, you will see a dotted border. I was wondering if this is just a quirk of the module? With the pages I have that work, the border is barely visible which I can accept.

Page that works as expected: http://mysmallbusinessally.com/LOGIN/login.php

Page with ContentPlaceHolder1 that has a transparent background and 0 border. http://mysmallbusinessally.com/LOGIN/login2.php


The other part of my inquiry was about the location of these pages. It seems that if the pages are located in the LOGIN directory, everything works as expected. If I publish the pages to a folder under LOGIN such as LOGIN/Members, the reposition module no longer works. I think I can work around this but I was curious as to what is happening. I'm assuming there are files that are needed in the subfolder that are not being published there.

One of the reasons I like this module is it makes it easier to do responsive designs. You change the width of the browser window down to a much smaller size with no need to change anything. (At least for this particular page)

Thanks again for your help.

[jordan]

... it occurred to me that it should be an expression like "150 + window1" and not the literal expression 'pixel-width + window-width' that I had ...

just to be sure, the command is literal, 0+win1 - not - 0 + window1 - no spaces no embellishments

... To illustrate the problem with a totally transparent ContentPlaceHolder, I created a clone of the login page that works correctly and a clone of the MasterFrame page. In the clone of the MasterFrame page, I made sure the style of ContentPlaceHolder1 had the background as transparent and the width of the border as 0. If you go to the links below you will see that the MasterFrame that is totally transparent, doesn't work. I had to give a border to the ContentPlaceHolder1 for it to work. If you look closely at the page that works, you will see a dotted border. I was wondering if this is just a quirk of the module? With the pages I have that work, the border is barely visible which I can accept.

Page that works as expected: http://mysmallbusinessally.com/LOGIN/login.php

Page with ContentPlaceHolder1 that has a transparent background and 0 border. http://mysmallbusinessally.com/LOGIN/login2.php ...

I can not see any difference between both links, - both - pages display a dotted border on the contentplaceholder for me ?

... The other part of my inquiry was about the location of these pages. It seems that if the pages are located in the LOGIN directory, everything works as expected. If I publish the pages to a folder under LOGIN such as LOGIN/Members, the reposition module no longer works. I think I can work around this but I was curious as to what is happening. I'm assuming there are files that are needed in the subfolder that are not being published there. ...

if you change the directory manual it is possible the path don't match, yes - does it work in WB preview ?
I have to see a live example to say anything meaningful about this

[ALguy61]

If you test the two links, you should be able to see the difference now. I thought that I had changed the MasterFrame page being used by one of the pages but it reverted back to the one with the dotted border. It's been weird how something doesn't work checking with a couple of browsers and then all of a sudden it now works. Go figure!

Yes, I meant to put win1 instead of the window1. What I think I've typed is often different from what I actually type.

Thanks for your patience and help with this.

I'm always looking for new extensions 1) to ease the creation of web pages and 2) to make them more enjoyable for the viewer.

You exention builders are phenomenol to say the least. It seems most of you have the heart of a teacher. Thanks!

[jordan]

ah, ok-ay, I see now:) - it is a concept variation

with a border set the contentplaceholder becomes an actual physical object on your page
that is why you can then target it with module reposition, it then works
when no border is set on the contentplaceholder, WB will not display the actual contentplaceholder itself, only it's content
in that scenario module reposition will not work, as there is nothing to target, the object does not exist

try this solution ...
- set a border on the contentplaceholder in WB
- add to the - contentplaceholder > Object HTML > Custom Style > border-width:0px;

[ALguy61]

Thanks for the reply I will check out your suggestion and see if it works. I just thought it was odd that it would make such a difference. It took me a few tries to nail down which settings were getting in the way of it working.

Thanks again!

[jordan]

jor_aniMateMASTERPACKv3.0 build 5.63 - UPDATE!

this update releases JMPv3.0 momentumscroll function plus adds and fixes some additional functions

for full update history, demos, tutorials and download see top post