Page 1 of 1

Card height

Posted: Mon Oct 13, 2025 4:43 pm
by Billywiz
Could someone point me in the direction of Equal height cards choice in the card container.
It shows in the help section as "Equal height cards:Specifies whether all cards in the same row should have the same height. If this option is off then cards with different content may have different heights."
I cannot see a reference to it.

Cheers

Re: Card height

Posted: Mon Oct 13, 2025 5:42 pm
by Pablo
If you place cards inside a card container then they all have the same height by default.
If you want to use cards inside a layout grid then you can use the 'minimum height' property.

Re: Card height

Posted: Wed Oct 15, 2025 9:23 am
by Billywiz
Thanks Pablo. I know that you can alter the card height in the workspace and that they all conform to the selected height but each card needs to have a set height depending on the content. When the site is uploaded then all the cards have different heights and looks strange if the speed/pause in the container is set quite slow in the "Cube". I got round this by choosing the card with the most content and setting the height, then set the same height for all the others and adjusting the content position/line height etc of the other cards so that all the cards in the "Cube" look the same height.

Thanks again for your help

Re: Card height

Posted: Wed Oct 15, 2025 11:34 am
by Pablo
As mentioned, you can use the minimum height to set the minimum height of cards.
So, you will need to determine the height of the tallest card and then adjust the minimum height of the cards.

If you need further assistance, then please share a DEMO project (not the full project) so I can see what you have done.