www.wysiwygwebbuilder.com

Hi Pablo,

If I have a Carousel that I want to apply to 1024,768,550 and 360 BPs - what are the correct settings with the Carousel and Images to display the images so that that the width is governed by the gutter width please?

Is it better to have the Carousel in a LG or accept that the Carousel is a container in itself?

and yes - I've set it to flexible - it's narrower than 340 pixels wide in a 360VP with a 10 pixel gutter - do you need a project extract?

Yes, I do need a demo project to see what you have done.
Also, what do you mean by the 'gutter width'?

Hi Pablo,

In preparing a minimised and focused zipped project I think I've discovered the issue - a conflict with another extension - I'll take that up with the provider. Won't say which one first because I want to be sure.

By "Gutter width" I was referring to the LG that has the Carousel in it.

Hi Pablo,

Just to give you an update on this issue.

I'm using the std WB Carousel for 1024 - 360 VPs and a member supplied 3D Carousel in the Default, 1580 and 1366 VPs.

Each in their own LG.

Turns out that the 3D used the same CAROUSEL CSS Class as the std WB CSS Class and overrode some of the CSS for the std Carousel. The supplier of the 3D Carousel kindly modified the 3d Extension CSS and after replacing the WBX file in the Documents>WYSIWYG Web Builder>system>extensions sub directory, the std Carousel width now reflects the gutter width for each BP that the std Carousel is contained in.