Icon Libraries

mfirlotte · Post by **mfirlotte** » Fri Sep 24, 2021 12:54 pm

I've just purchased and install WYSIWYG 17. Am now trying to install the Icon Libraries.

I extract and run "SETUP.EXE" then near the end of the install, it seems to get stuck at "Registering Fonts" step then after a few minutes the install freezes and I get "Program Not Responding" and have to forcibly shut it down. All 4 libraries do the same thing.

Post by **Pablo** » Fri Sep 24, 2021 12:59 pm

The new setups should not be registering the fonts. It only copies the files to the specified older. Which setups are you using?
I have tried on my computer but do not get this message.

zinc · Post by **zinc** » Fri Sep 24, 2021 1:09 pm

Pablo wrote: Fri Sep 24, 2021 12:59 pm The new setups should not be registering the fonts. It only copies the files to the specified older. Which setups are you using?
I have tried on my computer but do not get this message.

Pablo I can too confirm this issue.

I noticed you are using Setup Factory for these. could be that SF automatically has the "Register Font" option ON when adding a ttf or similar file?

Post by **Pablo** » Fri Sep 24, 2021 1:14 pm

The option Register Font in the setup is OFF.

I have tested on multiple machines, but for me the fonts are not registered..
Are you using these files?
http://downloads.wysiwygwebbuilder.com/wwb_bootstrapicons.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconsoutlined.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconsround.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconssharp.zip

zinc · Post by **zinc** » Fri Sep 24, 2021 1:18 pm

Pablo wrote: Fri Sep 24, 2021 1:14 pm The option Register Font in the setup is OFF.

I have tested on multiple machines, but for me the fonts are not registered..
Are you using these files?
http://downloads.wysiwygwebbuilder.com/wwb_bootstrapicons.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconsoutlined.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconsround.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconssharp.zip

I have and also switched off my AV and ran it as Admin:

https://pasteboard.co/c4FIVczkiC0S.png

Post by **Pablo** » Fri Sep 24, 2021 1:22 pm

Can you check the date of the setup.exe, it should be today.

zinc · Post by **zinc** » Fri Sep 24, 2021 1:23 pm

Pablo wrote: Fri Sep 24, 2021 1:22 pm Can you check the date of the setup.exe, it should be today.

24/09/2021 (14:18)

zinc · Post by **zinc** » Fri Sep 24, 2021 1:26 pm

Pablo do we even need installers for these files?

mfirlotte · Post by **mfirlotte** » Fri Sep 24, 2021 1:45 pm

Yes...I just downloaded from the links provided this morning. Date on extracted "setup.exe" files are today's date.

Post by **Pablo** » Fri Sep 24, 2021 1:46 pm

At the moment I do not know why this happens for you because I am sure the option is off in the configuration...
I may be time to look for another installer...

Anyway, you can also copy the files manually:
http://downloads.wysiwygwebbuilder.com/ ... _icons.zip
http://downloads.wysiwygwebbuilder.com/ ... tlined.zip
http://downloads.wysiwygwebbuilder.com/ ... _round.zip
http://downloads.wysiwygwebbuilder.com/ ... _sharp.zip

mfirlotte · Post by **mfirlotte** » Fri Sep 24, 2021 1:47 pm

I just tried your links in this post and same effect?

zinc · Post by **zinc** » Fri Sep 24, 2021 1:49 pm

Pablo wrote: Fri Sep 24, 2021 1:46 pm At the moment I do not know why this happens for you because I am sure the option is off in the configuration...
I may be time to look for another installer...

Anyway, you can also copy the files manually:
http://downloads.wysiwygwebbuilder.com/ ... _icons.zip
http://downloads.wysiwygwebbuilder.com/ ... tlined.zip
http://downloads.wysiwygwebbuilder.com/ ... _round.zip
http://downloads.wysiwygwebbuilder.com/ ... _sharp.zip

Perfect! I don't personally think it is a difficult job to unzip these in a specific directory. Any reason they are not part of WWB's installer?

mfirlotte · Post by **mfirlotte** » Fri Sep 24, 2021 1:50 pm

Okay...I will download and istall manually.

Can you please tell me where (which directory) on my system I should place these folders?

Thanks Pablo.

Post by **Pablo** » Fri Sep 24, 2021 2:02 pm

The files should be copied to:
\Documents\WYSIWYG Web Builder\system\iconlibraries

See also:
https://www.wysiwygwebbuilder.com/iconfonts.html

mfirlotte · Post by **mfirlotte** » Fri Sep 24, 2021 2:10 pm

That worked for me Pablo. Thank you.

miguelss · Post by **miguelss** » Sat Sep 25, 2021 9:05 am

Hi Pablo!

Manually installation works perfectly!

Thanks for your great support!

M.

Post by **Pablo** » Sun Sep 26, 2021 11:50 am

I have updated the setup files for the new icons. They are now using Inno Setup and have been digitally signed.
Maybe someone can try it this works better?
http://downloads.wysiwygwebbuilder.com/wwb_bootstrapicons.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconsoutlined.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconsround.zip
http://downloads.wysiwygwebbuilder.com/wwb_materialiconssharp.zip

FontAwesome 5 updates (for WWB17 only!):
http://downloads.wysiwygwebbuilder.com/wwb_farbrands.zip
http://downloads.wysiwygwebbuilder.com/wwb_faregular.zip
http://downloads.wysiwygwebbuilder.com/wwb_fasolid.zip

Note:
If you have already installed the icons then you may need to restart your computer before running the setup, otherwise the font files may be in locked/read-only.

alan_sh · Post by **alan_sh** » Sun Sep 26, 2021 12:41 pm

I just tried 'farbrands' and that worked OK

Alan

Post by **Pablo** » Sun Sep 26, 2021 1:13 pm

Thanks!

mfirlotte · Post by **mfirlotte** » Sun Sep 26, 2021 1:38 pm

Hi Pablo. I tried the new ZIPs for BootStrap and MaterialIconsOutlined and I get download errors saying, "Can't be downloaded securely". I use Microsoft Edge and the previous versions downloaded with no issues other than the original registering of the fonts issue (but I then used the manual versions you provided).

mfirlotte · Post by **mfirlotte** » Sun Sep 26, 2021 1:38 pm

And same issue with the newer files (farbrands).

Post by **Pablo** » Sun Sep 26, 2021 2:20 pm

The link are not https because they are on a sub domain (which would require a separate certificate)
However, the links safe (and they are the same as before).

www.wysiwygwebbuilder.com

Icon Libraries

Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries

Re: Icon Libraries