jor_gridRip 3.0

GrahamW · Post by **GrahamW** » Wed Oct 04, 2017 7:38 am

Hi Jordan,

where is the easy start project I cant locate it can you give a link please

As to the issue that Crispy was mentioning that is not the issue its over the right had side of the page. If I could upload images on this forum I would show a screenshot of the issue but i have no way up posting an image

This is what I see Jordan, if I remove gridrip it goes away, it only happens in Chrome any other browser I use I dont see it (IE, EDGE)

https://www.screencast.com/t/gYmdvb28pFu

Graham

GrahamW · Post by **GrahamW** » Wed Oct 04, 2017 9:04 am

Hi Jordan and Crispy

I found where the issue is with gridrip.

Everything works perfect on any web page with it but in WWB if you go into options>HTML then at the bottom of the page under web fonts select
use Google Fonts for non web-safe fonts.
Then upload the page and you will then see the image I posted in my previous post in the top right corner of your Google Chrome Browser.

Graham

jordan · Post by **jordan** » Wed Oct 04, 2017 5:19 pm

so this only occurs when jor_gridRip is on your page + google fonts is enabled + https is used ?:\
please try this ...
in jor_gridRip there is a - margin fix - option, set it to true - (SETUP GRIDRIP > SETTINGS > margin fix > true)
does that help ?

GrahamW · Post by **GrahamW** » Fri Oct 06, 2017 3:31 am

Hi Jordan,

i made that change and it made no difference.

I can confirm it only happens when google fonts is enabled + https is used

I uploaded the site to its correct location that is only http and google fonts enabled and it works perfect

Graham

jordan · Post by **jordan** » Fri Oct 06, 2017 2:06 pm

GrahamW wrote: ↑Fri Oct 06, 2017 3:31 am Hi Jordan,

i made that change and it made no difference.

I can confirm it only happens when google fonts is enabled + https is used

I uploaded the site to its correct location that is only http and google fonts enabled and it works perfect

Graham

glad to hear that works for you! ...

but, I do not see that you have changed the - margin fix - on your test site ?
always post a revised version so I can see the result please:\

other then that I'm clueless, I don't see how jor_gridRip can be the cause of this behavior ?
can you please post two tests for me ...

1. test ONE
leave jor_gridRip on the page, but, remove the entry that creates the effect
so, simply jor_gridRip on your page, that does nothing, no effect

2. test TWO
remove jor_gridRip completely

=====

two live test at the same time please, so I can see the result, - very strange this, hm:\

GrahamW · Post by **GrahamW** » Wed Jul 04, 2018 10:29 am

Hi Jordon

is there any way to make the transition a bit smoother

https://www.grahamscomputers.net/testin ... staff.html

if you cn test it on the and tell me what I need to change that would be great
Thanks
Graham

jordan · Post by **jordan** » Wed Jul 04, 2018 12:24 pm

hello GrahamW,

hmm, AFAICS on that page your using jor_gridRip directly on WB Text objects ?
jor_gridRip is made to be used on WB Layout Grids exclusive
if you want a text object to open then the text object must be placed inside a grid, - then target the grid
solution: use nested grids, target the Grid that holds the text

does that help?

GrahamW · Post by **GrahamW** » Wed Jul 04, 2018 12:53 pm

it actually is inside a nested grid.
i have it on another site and it works perfect all I did was copy the grid from one project to another and it has identical settings but the other site has no issue like this one

Graham

jordan · Post by **jordan** » Wed Jul 04, 2018 1:23 pm

GrahamW wrote: ↑Wed Jul 04, 2018 12:53 pm it actually is inside a nested grid.
i have it on another site and it works perfect all I did was copy the grid from one project to another and it has identical settings but the other site has no issue like this one

Graham

AFAICS your targeting WB Text objects, your targeting - megantext, romolatext, etc
which to me seem to be WB Text objects
they are placed inside a grid named - LayoutGrid2 - but your not targeting this LayoutGrid2
instead you are targeting the Text object themselves

code on your page reads:
$.jor_gridRip ({toOpen:'megantext',to ...

on the page that it does work correct you ARE targeting the Layout Grid (=target is LayoutGrid2)

code on your page reads:
$.jor_gridRip ({toOpen:'LayoutGrid2',to ...

GrahamW · Post by **GrahamW** » Thu Jul 05, 2018 6:12 am

yes that is correct as the grid is called megantext, Romolatext and so on

jordan · Post by **jordan** » Thu Jul 05, 2018 10:25 am

GrahamW wrote: ↑Thu Jul 05, 2018 6:12 am yes that is correct as the grid is called megantext, Romolatext and so on

meaning - (it is a grid) ?

again, AFAICS the target you use are Text objects, - megantext is a Text object not a Grid object

object on your page ...
===========================================================================================
<div id="wb_megantext" style="overflow: hidden; border-width: 0px;" jorgrtar1="#wb_Text14" jorgrtar2="#wb_not used" jorgrcls="not used">
<span style="color:#000000;font-family:'Open Sans';font-size:16px;">
<strong>Preschool Room Leader<br><br></strong>Diploma of Children’s Services & Working Towards Bachelor of Early Childhood Education<br>Megan commenced
work at Possums back in 2008, and she previously worked in preschool settings specialising with children with additional needs.
Megan is studying towards her Bachelor of Teaching birth to 5 years at CSU. Megan has been leading the service as the Director since 2014,
but working from the floor as the Preschool Room Leader while Romola supports the service. Megan leads the program and practice of the service through
her role as director and also educational leader of the service. <br>
</span>
</div>
===========================================================================================

this does not look like a Layout Grid object to me, the object has no row/columns, has a span element
how did you get the text (span) inside this "Grid" ?

- this is not a grid inside a grid, it is a text object (megantext) inside a grid (LayoutGrid2)

the megantext should be placed in it's own grid, then you target that grid

GrahamW · Post by **GrahamW** » Thu Jul 05, 2018 12:34 pm

I fixed it there was a left over script on the page causing things to not show correct once I removed it all started to work as was in the first place

thanks
Graham

jordan · Post by **jordan** » Thu Jul 05, 2018 12:59 pm

GrahamW wrote: ↑Thu Jul 05, 2018 12:34 pm I fixed it there was a left over script on the page causing things to not show correct once I removed it all started to work as was in the first place

thanks
Graham

don't know about any script you removed or if that matters
but, you now have placed the text in a grid and target the grid, goOd, - that's why it now works correct!
anyway, good it works for you now;)

pajadt · Post by **pajadt** » Thu Oct 03, 2019 6:22 pm

Hi Jordan
Today i try to use your great extesions, but in WWB 15 not work iI'm very sad

. when is the best ectension not working. is it possible in the future for your perfect extensions to work in WWB 15 64 bit version.
Thank You
Pajadt

BaconFries · Post by **BaconFries** » Thu Oct 03, 2019 9:39 pm

@pajadt jordan was Last active:Fri Oct 19, 2018 3:08 pm This may mean he may or may not read this, so any answer may not be soon.

jordan · Post by **jordan** » Fri Oct 04, 2019 12:04 pm

pajadt wrote: ↑Thu Oct 03, 2019 6:22 pm Hi Jordan
Today i try to use your great extesions, but in WWB 15 not work iI'm very sad . when is the best ectension not working. is it possible in the future for your perfect extensions to work in WWB 15 64 bit version.
Thank You
Pajadt

Hey there Calum, I'm still alive and kicking:) - Just no time for WB-ing saddly:C
Hope You are doing well and Well-er ! -

- !

Hello pajadt,

I do not have WB15, so I can not test it for you - it all works for me in WB14

- Do you have WB14 installed ? - does jor_gridRip work for you pre WB15 ?
- In WB15 set another jQuery version, try to see if that works
- Could you set up a live page so I can see what is happening for you

Hope to return to WB-ing in the future, but at the moment my scripting is rust dust covered:\
Don't know how much I can help, just shoot and try:)

pajadt · Post by **pajadt** » Fri Oct 04, 2019 3:57 pm

Hi Jordan
Dear friend, i build this with WWB14 32bit and all works, same i use and open with WWB 15 64 Bit not work, tfiis is best ever extensions for layout grid for design. and i sad now not work, in 64Bit version, i not installed 32bit to tested, but if posible to work with wb15, if need i buy for you WWB 15 like gift. not problem. you can contact me. you do to much for all users thank you
here is web
https://dd-time.com/jsor/

jordan · Post by **jordan** » Fri Oct 04, 2019 8:15 pm

Thanks for the offer pajadt, but buying is not the problem, time to use WB15 is -

Your example - which is my easystart redone? - is confusing to me
Please post the Demo of my original jor_gridRip_easystart
And, also use the latest jor_gridRip3.0 download

alan_sh · Post by **alan_sh** » Fri Oct 04, 2019 8:23 pm

Could it be because he was using a 32 bit extension and is now using 64 bit WBB?

Alan

jordan · Post by **jordan** » Fri Oct 04, 2019 9:37 pm

alan_sh wrote: ↑Fri Oct 04, 2019 8:23 pm Could it be because he was using a 32 bit extension and is now using 64 bit WBB?

Alan

Thanks for the input alan_sh, but I don't think that's the problem
Although, It's why I asked pajadt to use jor_gridRip3.0

But I think I know what the problem is ...

jordan · Post by **jordan** » Fri Oct 04, 2019 9:38 pm

Hi pajadt,

Please remove in WB15 the - Target folder for file type - js
You can find that under ...

Tools > Options > Publish > Target folder for file type > In here remove --- js

I hope the path is the same in WB15
jor_gridRip should then work correct, - does that solve it ?

pajadt · Post by **pajadt** » Fri Oct 04, 2019 9:59 pm

Hi I do as you says, i noticed one in code not have path to js your script

Code: Select all

<script src="js/jor_gridRip/jor_gridRip.js"></script>

yes that is it GREAT FRIEND now work
i have some problems with upload not overwrite so i create new
https://dd-time.com/jorsextensions/

jordan · Post by **jordan** » Fri Oct 04, 2019 10:14 pm

pajadt wrote: ↑Fri Oct 04, 2019 9:59 pm Hi I do as you says, i noticed one in code not have path to js your script
Code: Select all
<script src="js/jor_gridRip/jor_gridRip.js"></script>
yes that is it GREAT FRIEND now work
i have some problems with upload not overwrite so i create new
https://dd-time.com/jorsextensions/

GoOd!

pajadt · Post by **pajadt** » Fri Oct 04, 2019 10:17 pm

when you here to ask sometnig is have options to actvate ectensions with radio buttons to be overlap. grid in front of the grid
Thank You. also to says sometnig about design, this is not serious, this is for fun

. serious design is must to be much better

BaconFries · Post by **BaconFries** » Fri Oct 04, 2019 10:36 pm

Hi jordan nice to hear from you. I am doing ok hope all is well with you. I will try and drop a email to you after the weekend just to let you know what's been happening.

jordan · Post by **jordan** » Fri Oct 04, 2019 11:04 pm

BaconFries wrote: ↑Fri Oct 04, 2019 10:36 pm Hi jordan nice to hear from you. I am doing ok hope all is well with you. I will try and drop a email to you after the weekend just to let you know what's been happening.

GrahamW · Post by **GrahamW** » Sat Sep 12, 2020 12:19 pm

Hi Jordon ive been using your extension in WB15 32bit with no issue however in in WB16 64 bit I cant get it to work at all

jordan · Post by **jordan** » Sun Sep 13, 2020 10:31 am

GrahamW wrote: ↑Sat Sep 12, 2020 12:19 pm Hi Jordon ive been using your extension in WB15 32bit with no issue however in in WB16 64 bit I cant get it to work at all

Hello GrahamW

I don't have WB16 to test, so I wouldn't know ?
But, most likely it's your WB16 settings, try this ... Tools > Options > Publish > Target Folder for File Types > Remove js from this list
If that is not the case, then please provide a live demo, so I can see what is happening

GrahamW · Post by **GrahamW** » Sun Sep 13, 2020 10:32 pm

Thanks Jordon,
I checked the setting and its not there so I will do a project and give you a link to download it.
If I open an existing WB15 project in V16 it will work but if I try and use the extension on a new WB16 project it wont work

Graham

jordan · Post by **jordan** » Sun Sep 13, 2020 11:14 pm

Hi GrahamW,

Don't send me a demo project, I don't have WB16, so I can not open it
Just a Live Demo of whatever is published will do, so I can try to figure out what's happening

wwonderfull · Post by **wwonderfull** » Wed Apr 12, 2023 4:06 pm

Can any one confirm if this works in wwb 18 the latest version?

BaconFries · Post by **BaconFries** » Wed Apr 12, 2023 4:17 pm

@wwonderfull why not just test it for yourself? if you read previous questions from GrahamW it was not working in WB16 so it probably won't work in WB18 Also note jordan isn't active
(Last active:Mon Sep 14, 2020 12:14 am) in the forum so he may not reply and probably won't update the extension to work in WB18 as he doesn't use it (I believe)

wwonderfull · Post by **wwonderfull** » Wed Apr 12, 2023 4:25 pm

BaconFries wrote: ↑Wed Apr 12, 2023 4:17 pm @wwonderfull why not just test it for yourself? if you read previous questions from GrahamW it was not working in WB16 so it probably won't work in WB18 Also note jordan isn't active in the forum so he may not reply and probably won't update the extension to work in WB18.

I did test it myself obviously. But needed others to confirm if it is different for others. It seems he came 3 years ago maybe I can email him and see if there can be any progress. If you can find any extension similar to this then inform.

crispy68 · Post by **crispy68** » Wed Apr 12, 2023 6:15 pm

I don't have any issues using it with WB18.

wwonderfull · Post by **wwonderfull** » Thu Apr 13, 2023 3:01 am

crispy68 wrote: ↑Wed Apr 12, 2023 6:15 pm I don't have any issues using it with WB18.

Interesting... did you use the 64 bit version or 32 bit? Can you share any demo project if possible @crispy. I would like to use this to more advanced creative solutions.

crispy68 · Post by **crispy68** » Thu Apr 13, 2023 12:19 pm

Yes, I'm using the 64bit version. I don't have a demo to share. I have a template and website I've created using it and works for me when I load both of them into WB18.

What problem are you having exactly?

wwonderfull · Post by **wwonderfull** » Thu Apr 13, 2023 2:57 pm

crispy68 wrote: ↑Thu Apr 13, 2023 12:19 pm Yes, I'm using the 64bit version. I don't have a demo to share. I have a template and website I've created using it and works for me when I load both of them into WB18.

What problem are you having exactly?

Well, i downloaded a sample template with the extension @jordan provided. The project .wbs file was from wwb11 as stated. the extension was there the layout was there but nothing seemed to happen when clicked. I even tried installing previous version of wwb but still nothing happened. That was the reason i was looking for someone to upload a demo with the latest wwb18 the same example which @jordan provided with wwb11 so it becomes an updated demo and also compatibly working for all.

http://www.jorextensions.com/wb/downloa ... Rip3.0.rar

Downloaded it from official page got a demo but it does not function. Does it need any special configurations or instructions?

crispy68 · Post by **crispy68** » Thu Apr 13, 2023 3:34 pm

I can't say anything about the demo template he provides in the download and would need to look at it to see why it may or may not work. However, he does provide instructions on how to set it up.

The template I created here (see the menu section):
https://webbuildertemplates.com/templat ... rillHouse/

Uses it and was created with WB16. This same template loaded in WB17 and WB18 works fine also.

I've also used here in a live setting which I believe was done using WB17:
https://thefillinnstation.com/

wwonderfull · Post by **wwonderfull** » Thu Apr 13, 2023 3:52 pm

crispy68 wrote: ↑Thu Apr 13, 2023 3:34 pm I can't say anything about the demo template he provides in the download and would need to look at it to see why it may or may not work. However, he does provide instructions on how to set it up.

The template I created here (see the menu section):
https://webbuildertemplates.com/templat ... rillHouse/

Uses it and was created with WB16. This same template loaded in WB17 and WB18 works fine also.

I've also used here in a live setting which I believe was done using WB17:
https://thefillinnstation.com/

Amazing piece of work crispy!
I now figured out my problem. Checked the console it said jor_grid js could not be found. Then recalled what @jordan said to @wwbman

But, most likely it's your WB16 settings, try this ... Tools > Options > Publish > Target Folder for File Types > Remove js from this list

So after removing the js folder its working fine now. I experiment with extensions sometimes. But this one is an oldschool jam rocking for future I think. So I had to try it. Thanks for your help