UnlockRreix

All WYSIWYG Web Builder support issues that are not covered in the forums below.
Forum rules
IMPORTANT NOTE!!

DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.



PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901

MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
Post Reply
FloatingPoint
 
 
Posts: 13
Joined: Thu Apr 24, 2025 7:38 pm

UnlockRreix

Post by FloatingPoint »

Greetings,

I publish my website previously with success. However, just recently as I tried to update a page I received "UnlockRreix" Publish Failed! Error. I guess it appears something is locked but I don't know how to unlock it.

Any help would be greatly appreciated. Thank you.
FloatingPoint
 
 
Posts: 13
Joined: Thu Apr 24, 2025 7:38 pm

Re: UnlockRreix

Post by FloatingPoint »

Here's more from the error I received.

*** START OF PUBLISH***
scanning publish folder…
Found 16 file(s).
Log: connect_Ftp2: DllDate: Feb 27 2024 version: 9.5.0.97 UnlockPrefix: BABLOS UnlockStatus: 2 Architecture: Little Endian;64-bit Language visual C++/X64 etc. it goes on for a very long time and can't be copied even though there is a link that says copy publish log to clipboard. That doesn't work.

Anyway, it goes on to say removing temporary files…
Publish field!
***END OF PUBLISH***
User avatar
Pablo
 
Posts: 23437
Joined: Sun Mar 28, 2004 12:00 pm
Location: Europe
Contact:

Re: UnlockRreix

Post by Pablo »

To be able to help you, I need the complete publish log.
Please set the loglevel to 'all' and share the complete log of your lates attempt.

See also:
viewtopic.php?t=36493

Note that if it suddenly stopped working and you have not changed anything yourself, then it's usually a server related issue.
FloatingPoint
 
 
Posts: 13
Joined: Thu Apr 24, 2025 7:38 pm

Re: UnlockRreix

Post by FloatingPoint »

Ok, here's the log. I only REMOVED host, IP and username.

09/05/2025 07:49:06.953 *** START OF PUBLISH ***
09/05/2025 07:49:06.954 Scanning publish folder...
09/05/2025 07:49:06.958 Found 16 file(s).
09/05/2025 07:49:06.961 Transfering 16 file(s) using FTP (standard File Transfer Protocol)
09/05/2025 07:49:06.963 Connecting to REMOVED (Attempt 1 of 3)
09/05/2025 07:49:12.348 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
09/05/2025 07:49:12.349 220-You are user number 1 of 150 allowed.
09/05/2025 07:49:12.350 220-Local time is now 07:49. Server port: 21.
09/05/2025 07:49:12.351 220 You will be disconnected after 15 minutes of inactivity.
09/05/2025 07:49:12.352 USER REMOVED
09/05/2025 07:49:12.352 331 User REMOVED OK. Password required
09/05/2025 07:49:12.353 PASS ****
09/05/2025 07:49:12.354 530 Login authentication failed
09/05/2025 07:49:12.357 Log:
Connect_Ftp2:
DllDate: Feb 27 2024
Version: 9.5.0.97
UnlockPrefix: PABLOS
UnlockStatus: 2
Architecture: Little Endian; 64-bit
Language: Visual C++ / x64
VerboseLogging: 0
ProgressMonitoring:
enabled: no
heartbeatMs: 0
sendBufferSize: 65536
--ProgressMonitoring
ImplicitSsl: 0
AuthTls: 0
AuthSsl: 0
ftpConnect:
Hostname: REMOVED
Port: 21
IdleTimeoutMs: 60000
socket2Connect:
connect2:
connectSocket_v2:
connect_domain:
ckDnsResolveDomainIPv4_n:
domainName: REMOVED
--ckDnsResolveDomainIPv4_n
ipv4_address: REMOVED
--connect_domain
--connectSocket_v2
--connect2
--socket2Connect
socketOptions:
SO_SNDBUF: 262144
SO_RCVBUF: 4194304
TCP_NODELAY: 1
SO_KEEPALIVE: 1
--socketOptions
readCommandResponse:
replyLineQP: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
replyLineQP: 220-You are user number 1 of 150 allowed.
replyLineQP: 220-Local time is now 07:49. Server port: 21.
replyLineQP: 220 You will be disconnected after 15 minutes of inactivity.
--readCommandResponse
initialStatus: 220
initialResponse: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 150 allowed.
220-Local time is now 07:49. Server port: 21.
220 You will be disconnected after 15 minutes of inactivity.
--ftpConnect
tlsSessionInfo:
forceReuseTlsSession: False
tlsVersionMajor: 0
tlsVersionMinor: 0
sessionId: (empty)
masterSecretLen: 0
tls13_resumption_secret_len: 0
prfHashAlg: None
We do NOT have the TLS server certs.
We do NOT have a TLS 1.3 session ticket.
--tlsSessionInfo
Logging in...
Login:
sendCommand:
sendingCommand: USER REMOVED
--sendCommand
readCommandResponse:
replyLineQP: 331 User REMOVED OK. Password required
--readCommandResponse
sendCommand:
sendingCommand: PASS *
--sendCommand
readCommandResponse:
replyLineQP: 530 Login authentication failed
--readCommandResponse
--Login
Failed.
--Connect_Ftp2
--Log

09/05/2025 07:49:12.360 Failed to connect to REMOVED (Attempt 1 of 3)
09/05/2025 07:49:12.363 Connecting to REMOVED (Attempt 2 of 3)
09/05/2025 07:49:18.138 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
09/05/2025 07:49:18.144 220-You are user number 1 of 150 allowed.
09/05/2025 07:49:18.151 220-Local time is now 07:49. Server port: 21.
09/05/2025 07:49:18.157 220 You will be disconnected after 15 minutes of inactivity.
09/05/2025 07:49:18.163 USER REMOVED
09/05/2025 07:49:18.169 331 User REMOVED OK. Password required
09/05/2025 07:49:18.175 PASS ****
09/05/2025 07:49:18.181 530 Login authentication failed
09/05/2025 07:49:18.192 Log:
Connect_Ftp2:
DllDate: Feb 27 2024
Version: 9.5.0.97
UnlockPrefix: PABLOS
UnlockStatus: 2
Architecture: Little Endian; 64-bit
Language: Visual C++ / x64
VerboseLogging: 0
ProgressMonitoring:
enabled: no
heartbeatMs: 0
sendBufferSize: 65536
--ProgressMonitoring
ImplicitSsl: 0
AuthTls: 0
AuthSsl: 0
ftpConnect:
Hostname: REMOVED
Port: 21
IdleTimeoutMs: 60000
socket2Connect:
connect2:
connectSocket_v2:
connect_domain:
ckDnsResolveDomainIPv4_n:
domainName: REMOVED
--ckDnsResolveDomainIPv4_n
ipv4_address: REMOVED
--connect_domain
--connectSocket_v2
--connect2
--socket2Connect
socketOptions:
SO_SNDBUF: 262144
SO_RCVBUF: 4194304
TCP_NODELAY: 1
SO_KEEPALIVE: 1
--socketOptions
readCommandResponse:
replyLineQP: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
replyLineQP: 220-You are user number 1 of 150 allowed.
replyLineQP: 220-Local time is now 07:49. Server port: 21.
replyLineQP: 220 You will be disconnected after 15 minutes of inactivity.
--readCommandResponse
initialStatus: 220
initialResponse: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 150 allowed.
220-Local time is now 07:49. Server port: 21.
220 You will be disconnected after 15 minutes of inactivity.
--ftpConnect
tlsSessionInfo:
forceReuseTlsSession: False
tlsVersionMajor: 0
tlsVersionMinor: 0
sessionId: (empty)
masterSecretLen: 0
tls13_resumption_secret_len: 0
prfHashAlg: None
We do NOT have the TLS server certs.
We do NOT have a TLS 1.3 session ticket.
--tlsSessionInfo
Logging in...
Login:
sendCommand:
sendingCommand: USER REMOVED
--sendCommand
readCommandResponse:
replyLineQP: 331 User REMOVED OK. Password required
--readCommandResponse
sendCommand:
sendingCommand: PASS *
--sendCommand
readCommandResponse:
replyLineQP: 530 Login authentication failed
--readCommandResponse
--Login
Failed.
--Connect_Ftp2
--Log

09/05/2025 07:49:18.202 Failed to connect to REMOVED (Attempt 2 of 3)
09/05/2025 07:49:18.212 Connecting to REMOVED (Attempt 3 of 3)
09/05/2025 07:49:23.387 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
09/05/2025 07:49:23.397 220-You are user number 1 of 150 allowed.
09/05/2025 07:49:23.403 220-Local time is now 07:49. Server port: 21.
09/05/2025 07:49:23.409 220 You will be disconnected after 15 minutes of inactivity.
09/05/2025 07:49:23.415 USER REMOVED
09/05/2025 07:49:23.422 331 User REMOVED OK. Password required
09/05/2025 07:49:23.428 PASS ****
09/05/2025 07:49:23.434 530 Login authentication failed
09/05/2025 07:49:23.444 Log:
Connect_Ftp2:
DllDate: Feb 27 2024
Version: 9.5.0.97
UnlockPrefix: PABLOS
UnlockStatus: 2
Architecture: Little Endian; 64-bit
Language: Visual C++ / x64
VerboseLogging: 0
ProgressMonitoring:
enabled: no
heartbeatMs: 0
sendBufferSize: 65536
--ProgressMonitoring
ImplicitSsl: 0
AuthTls: 0
AuthSsl: 0
ftpConnect:
Hostname: REMOVED
Port: 21
IdleTimeoutMs: 60000
socket2Connect:
connect2:
connectSocket_v2:
connect_domain:
ckDnsResolveDomainIPv4_n:
domainName: REMOVED
--ckDnsResolveDomainIPv4_n
ipv4_address: REMOVED
--connect_domain
--connectSocket_v2
--connect2
--socket2Connect
socketOptions:
SO_SNDBUF: 262144
SO_RCVBUF: 4194304
TCP_NODELAY: 1
SO_KEEPALIVE: 1
--socketOptions
readCommandResponse:
replyLineQP: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
replyLineQP: 220-You are user number 1 of 150 allowed.
replyLineQP: 220-Local time is now 07:49. Server port: 21.
replyLineQP: 220 You will be disconnected after 15 minutes of inactivity.
--readCommandResponse
initialStatus: 220
initialResponse: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 150 allowed.
220-Local time is now 07:49. Server port: 21.
220 You will be disconnected after 15 minutes of inactivity.
--ftpConnect
tlsSessionInfo:
forceReuseTlsSession: False
tlsVersionMajor: 0
tlsVersionMinor: 0
sessionId: (empty)
masterSecretLen: 0
tls13_resumption_secret_len: 0
prfHashAlg: None
We do NOT have the TLS server certs.
We do NOT have a TLS 1.3 session ticket.
--tlsSessionInfo
Logging in...
Login:
sendCommand:
sendingCommand: USER REMOVED
--sendCommand
readCommandResponse:
replyLineQP: 331 User REMOVED OK. Password required
--readCommandResponse
sendCommand:
sendingCommand: PASS *
--sendCommand
readCommandResponse:
replyLineQP: 530 Login authentication failed
--readCommandResponse
--Login
Failed.
--Connect_Ftp2
--Log

09/05/2025 07:49:23.454 Removing temporary files...
09/05/2025 07:49:23.466 Publish failed!
09/05/2025 07:49:23.476 *** END OF PUBLISH ***
User avatar
Pablo
 
Posts: 23437
Joined: Sun Mar 28, 2004 12:00 pm
Location: Europe
Contact:

Re: UnlockRreix

Post by Pablo »

The message
530 Login authentication failed
seemsa to indicate that your username or password is incorrect.
Maybe it has been changed?
FloatingPoint
 
 
Posts: 13
Joined: Thu Apr 24, 2025 7:38 pm

Re: UnlockRreix

Post by FloatingPoint »

Yeah, I seen that too. But his is the problem… Before this started, I created a backup copy and call it Dev. The Dev environment has the exact same settings and is able to login. The working version the one I just posted the log for does not login.

As a matter of fact, just after I did this log I logged in and posted a webpage using the dev environment with the same settings for ftp.
FloatingPoint
 
 
Posts: 13
Joined: Thu Apr 24, 2025 7:38 pm

Re: UnlockRreix

Post by FloatingPoint »

Okay... I took a look at the settings again to make sure everything was correct. It was, but I entered the information in a second time, and it worked. Thank you, Pablo.
Post Reply