Could someone point me in the direction of Equal height cards choice in the card container.
It shows in the help section as "Equal height cards:Specifies whether all cards in the same row should have the same height. If this option is off then cards with different content may have different heights."
I cannot see a reference to it.
Cheers
Card height
Forum rules
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
- Billywiz
-
- Posts: 163
- Joined: Thu Jul 17, 2008 3:32 pm
- Location: UK
- Contact:
- Pablo
- Posts: 23886
- Joined: Sun Mar 28, 2004 12:00 pm
- Location: Europe
- Contact:
Re: Card height
If you place cards inside a card container then they all have the same height by default.
If you want to use cards inside a layout grid then you can use the 'minimum height' property.
If you want to use cards inside a layout grid then you can use the 'minimum height' property.
- Billywiz
-
- Posts: 163
- Joined: Thu Jul 17, 2008 3:32 pm
- Location: UK
- Contact:
Re: Card height
Thanks Pablo. I know that you can alter the card height in the workspace and that they all conform to the selected height but each card needs to have a set height depending on the content. When the site is uploaded then all the cards have different heights and looks strange if the speed/pause in the container is set quite slow in the "Cube". I got round this by choosing the card with the most content and setting the height, then set the same height for all the others and adjusting the content position/line height etc of the other cards so that all the cards in the "Cube" look the same height.
Thanks again for your help
Thanks again for your help
- Pablo
- Posts: 23886
- Joined: Sun Mar 28, 2004 12:00 pm
- Location: Europe
- Contact:
Re: Card height
As mentioned, you can use the minimum height to set the minimum height of cards.
So, you will need to determine the height of the tallest card and then adjust the minimum height of the cards.
If you need further assistance, then please share a DEMO project (not the full project) so I can see what you have done.
So, you will need to determine the height of the tallest card and then adjust the minimum height of the cards.
If you need further assistance, then please share a DEMO project (not the full project) so I can see what you have done.