Project view ≠ Preview/Publish views
Forum rules
PLEASE READ THE FORUM RULES BEFORE YOU POST:
viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/publish.html
http://www.wysiwygwebbuilder.com/preview.html
Frequently Asked Questions about Publishing
PLEASE READ THE FORUM RULES BEFORE YOU POST:
viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/publish.html
http://www.wysiwygwebbuilder.com/preview.html
Frequently Asked Questions about Publishing
Project view ≠ Preview/Publish views
Hello All!
As a longtime "90 Second" user I downloaded the new V16 and trying to migrate my V12 project files on my old PC to my new PC w/V16.
I was finally able to migrate the files albeit without images and established 'trees" - both I can easily fix.
My problem: the project view looks 100% perfect but "Preview and Publish" views screw-up. See attached screen shot links of my "TEST2" webpage:
Project: https://i.postimg.cc/bYMhqcGN/TEST2-Project.png (only the top of page from my laptop)
Preview: https://i.postimg.cc/RF9dzFmJ/TEST2.png
Publish: https://i.postimg.cc/wjkxq48f/TEST2-pub-ished-100.png
I have searched & read threads on this topic but any "solutions" have not worked for me.
Any help & direction will be appreciated as I'm relunctant to publish my entire website until I can get my "TEST2" to format correctly.
Thanks in advance to all replies!
Jim
As a longtime "90 Second" user I downloaded the new V16 and trying to migrate my V12 project files on my old PC to my new PC w/V16.
I was finally able to migrate the files albeit without images and established 'trees" - both I can easily fix.
My problem: the project view looks 100% perfect but "Preview and Publish" views screw-up. See attached screen shot links of my "TEST2" webpage:
Project: https://i.postimg.cc/bYMhqcGN/TEST2-Project.png (only the top of page from my laptop)
Preview: https://i.postimg.cc/RF9dzFmJ/TEST2.png
Publish: https://i.postimg.cc/wjkxq48f/TEST2-pub-ished-100.png
I have searched & read threads on this topic but any "solutions" have not worked for me.
Any help & direction will be appreciated as I'm relunctant to publish my entire website until I can get my "TEST2" to format correctly.
Thanks in advance to all replies!
Jim
Re: Project view ≠ Preview/Publish views
your image links dont work
Re: Project view ≠ Preview/Publish views
I think this is related to the DPI configuration.
Related FAQ:
https://www.wysiwygwebbuilder.com/forum ... 10&t=85917
Related FAQ:
https://www.wysiwygwebbuilder.com/forum ... 10&t=85917
Re: Project view ≠ Preview/Publish views
Thank you, Pablo.
After checking "Enable High DPI support", the Preview is 100% OK but the re-Published site is still having format errors.
New PREVIEW TEST2: https://i.postimg.cc/v8gH41q5/TEST2-Preview2.png
New Published TEST2: https://i.postimg.cc/Gpmbd9T8/TEST2-Pub ... yellow.png
Note the new published webpage has a layer added (as noted by yellow brackets) and green outline/border is missing.
We're getting close!
Thanks Pablo for your help - much appreciated!!!
Jim
After checking "Enable High DPI support", the Preview is 100% OK but the re-Published site is still having format errors.
New PREVIEW TEST2: https://i.postimg.cc/v8gH41q5/TEST2-Preview2.png
New Published TEST2: https://i.postimg.cc/Gpmbd9T8/TEST2-Pub ... yellow.png
Note the new published webpage has a layer added (as noted by yellow brackets) and green outline/border is missing.
We're getting close!
Thanks Pablo for your help - much appreciated!!!
Jim
Re: Project view ≠ Preview/Publish views
There is no difference between the HTML for preview and the published page.
In both cases the exact same files will be generated.
Maybe you did not publish all files?
Or maybe you will need to clear your browser cache?
In both cases the exact same files will be generated.
Maybe you did not publish all files?
Or maybe you will need to clear your browser cache?
Re: Project view ≠ Preview/Publish views
UPDATE:
I edited the page to keep info to a bare minimum and hopefully it helps to identify the culprit.
The PREVIEW version is 100% perfect
https://i.postimg.cc/7PnQ7mpr/TEST2-Preview3.png
The PUBLISHED version has added a strangely shaped layer with gradient background. The heading border was changed but that can easily be corrected.
https://i.postimg.cc/zfTkNfNY/TEST2-Publish3.png
As with all previous publishing, "PUBLISH ALL FILES" was chosen.
Additionally, on my old PC with v12, the page published 100% correct. I'll spend some time comparing settings on old PC and new PC.
Thanks for any suggestions & feedback.
I edited the page to keep info to a bare minimum and hopefully it helps to identify the culprit.
The PREVIEW version is 100% perfect
https://i.postimg.cc/7PnQ7mpr/TEST2-Preview3.png
The PUBLISHED version has added a strangely shaped layer with gradient background. The heading border was changed but that can easily be corrected.
https://i.postimg.cc/zfTkNfNY/TEST2-Publish3.png
As with all previous publishing, "PUBLISH ALL FILES" was chosen.
Additionally, on my old PC with v12, the page published 100% correct. I'll spend some time comparing settings on old PC and new PC.
Thanks for any suggestions & feedback.
- BaconFries
-
- Posts: 5653
- Joined: Thu Aug 16, 2007 7:32 pm
Re: Project view ≠ Preview/Publish views
To be honest displaying a image or images doesn't help provide a answer. It is always best to include a link / url to the page / site in question this is so it can be viewed and then hopefully a solution provided. Alternatively you can also provide a copy of the project before doing so please read the following urls.
Please provide a demo project
https://www.wysiwygwebbuilder.com/forum ... =5&t=88125
How do I share my project to get help?
https://www.wysiwygwebbuilder.com/forum ... 10&t=82134
Please provide a demo project
https://www.wysiwygwebbuilder.com/forum ... =5&t=88125
How do I share my project to get help?
https://www.wysiwygwebbuilder.com/forum ... 10&t=82134
Re: Project view ≠ Preview/Publish views
Base on your screenshots it looks like there is a conflict with image names.
To be able to help you, I need a copy of the projetc file so I can see all your settings.
To be able to help you, I need a copy of the projetc file so I can see all your settings.
Re: Project view ≠ Preview/Publish views
Pablo - how do I get the project file to you?
Here is the active webpage: http://www.tmhaudio.com/TEST2.html#
As noted before, I removed all but the basic info so the oddly shaped "layer" that was inserted by the software can be easily seen.
In addition, my project has a narrow green border where the text & content would be placed - this was eliminated in the publishing.
Although the top "heading/border" was also changed a bit, I think I can fix that without much problem.
Thanks so much for your help, Pablo!
Jim Ricketts/tmhaudio
Here is the active webpage: http://www.tmhaudio.com/TEST2.html#
As noted before, I removed all but the basic info so the oddly shaped "layer" that was inserted by the software can be easily seen.
In addition, my project has a narrow green border where the text & content would be placed - this was eliminated in the publishing.
Although the top "heading/border" was also changed a bit, I think I can fix that without much problem.
Thanks so much for your help, Pablo!
Jim Ricketts/tmhaudio
Re: Project view ≠ Preview/Publish views
The page looks correct for me.
Maybe there is an issue with your browse cache?
Maybe there is an issue with your browse cache?
Re: Project view ≠ Preview/Publish views
Pablo,
I cleared the image browser cache and re-published...IT WORKS!!!
The strange layer image is gone and the green border has returned...just like on the preview.
Also, the header/border is back to normal 100% OK.
To further test, I inserted two text boxes each with a border - one with a transparent background and the other with a gradient background.
Re-published "all files"
The text now appears but both borders and the gradient background is not visible.
PREVIEW: https://i.postimg.cc/htHV7MVd/TEST2-PREVIEW4.png
PUBLISH: https://i.postimg.cc/ryBdjzKB/TEST2-PUBLISH4.png
Pablo, is there another "cache" that requires to be cleared to get the borders and backgrounds to publish?
Thanks again for your help - so darn close now!
Jim Ricketts/tmhaudio
I cleared the image browser cache and re-published...IT WORKS!!!
The strange layer image is gone and the green border has returned...just like on the preview.
Also, the header/border is back to normal 100% OK.
To further test, I inserted two text boxes each with a border - one with a transparent background and the other with a gradient background.
Re-published "all files"
The text now appears but both borders and the gradient background is not visible.
PREVIEW: https://i.postimg.cc/htHV7MVd/TEST2-PREVIEW4.png
PUBLISH: https://i.postimg.cc/ryBdjzKB/TEST2-PUBLISH4.png
Pablo, is there another "cache" that requires to be cleared to get the borders and backgrounds to publish?
Thanks again for your help - so darn close now!
Jim Ricketts/tmhaudio
Re: Project view ≠ Preview/Publish views
--- UPDATE ---
Huzzah...everything is working 100% OK now.
Not sure why the delay after publishing in showing the border box and its' gradient background.
But all's well that ends well.
A big THANK YOU to Pablo for his assistance and patience - sincerely appreciated.
Now I just need to add all the images on my website as they did not migrate over from my v12 files to v16.
Again, thank you Pablo!
Jim Ricketts/tmhaudio
Huzzah...everything is working 100% OK now.
Not sure why the delay after publishing in showing the border box and its' gradient background.
But all's well that ends well.
A big THANK YOU to Pablo for his assistance and patience - sincerely appreciated.
Now I just need to add all the images on my website as they did not migrate over from my v12 files to v16.
Again, thank you Pablo!
Jim Ricketts/tmhaudio