A link problem??
Forum rules
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
IMPORTANT NOTE!!
DO YOU HAVE A QUESTION OR PROBLEM AND WANT QUICK HELP?
THEN PLEASE SHARE A "DEMO" PROJECT.
PLEASE READ THE FORUM RULES BEFORE YOU POST:
http://www.wysiwygwebbuilder.com/forum/viewtopic.php?f=12&t=1901
MUST READ:
http://www.wysiwygwebbuilder.com/getting_started.html
WYSIWYG Web Builder FAQ
-
Trugmaker
-
- Posts: 213
- Joined: Mon Mar 23, 2015 3:11 pm
- Location: East Sussex UK
- Contact:
A link problem??
I have just inserted an image of a Euro flag with a link to a new page. I have correctly added the ‘page in this project’ on the link tab, but it always shows ‘Your file couldn’t be accessed’. If I change the link to any of the other of my pages, it works perfectly. There is no Typo of the linked page. I cannot work this out!
Never complain about getting old, the alternative is far worse!
-
Trugmaker
-
- Posts: 213
- Joined: Mon Mar 23, 2015 3:11 pm
- Location: East Sussex UK
- Contact:
Re: A link problem??
Please IGNORE - Sorted!
Never complain about getting old, the alternative is far worse!
-
AliGW
-
- Posts: 243
- Joined: Thu Dec 19, 2024 3:41 pm
Re: A link problem??
Is the page in question hidden in some way (i.e. set not to publish)?
Ali
Retired, but still loving to learn & very busy.
https://alisongwright.me.uk
Novice with WWB, but was an avid user of Serif WebPlus before.
Fairly expert at Microsoft Excel (but not VBA).
Retired, but still loving to learn & very busy.
https://alisongwright.me.uk
Novice with WWB, but was an avid user of Serif WebPlus before.
Fairly expert at Microsoft Excel (but not VBA).
-
Pablo
- Posts: 23762
- Joined: Sun Mar 28, 2004 12:00 pm
- Location: Europe
- Contact:
Re: A link problem??
Without seeing what you have done it will be difficult to say what you did wrong.
But maybe you did not publish/preview all files?
But maybe you did not publish/preview all files?
-
BaconFries
-
- Posts: 6040
- Joined: Thu Aug 16, 2007 7:32 pm
Re: A link problem??
Without see what you may or may not have done it difficult to say. You can either provide a link to the page in question or share a basic project (.wbs) this only needs to be the page in question and the linked page so it can be viewed in the software.
https://www.wysiwygwebbuilder.com/links.html
https://www.wysiwygwebbuilder.com/links.html